DIN S355JR/GB Q355B
Qilu
Product Description
DIN S355JR GB Q355B Carbon Steel Flat / Plate
1: DIN S355JR Steel Introduction
S355JR is a low alloy high strength structural steel conforming to European standard EN 10025. S355JR steel in China is low alloy high strength structural steel with hardness of 70-80B and yield strength of 300-400MPa. And has very good processing formability and welding performance, as well as excellent low temperature toughness.
S355JR steel Stock in warehouse
2: DIN S355JR Quality Standard
DIN17100 1980-ENG Steels for general structural purposes.pdf
3: DIN S355JR Steel Equivalent
| Country | China | Japan | Germany | USA | British |
| Standard | GB/T 1591 | JIS | DIN (W-Nr.) EN 10025-2 / DIN17100 | AISI/ASTM | BS |
| Grade | Q355B | S355JR |
4: DIN S355JR Steel Chemical Composition
| Grade | C | Si | Mn | P | S | Cr | Cu | Ni |
| S355JR | 0.22 | 0.55 | 1.60 | 0.025 | 0.025 | / | 0.55 | / |
| Q355B | 0.24 | 0.55 | 1.60 | 0.035 | 0.035 | 0.30 | 0.40 | 0.30 |
5: DIN S355JR Steel Mechanical Properties
The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normalized, tempered, QT. If you want to know the properties, kindly contact the salesman.
6: DIN S355JR Steel Overviews
| Size | Round | Dia 6-1200mm |
| Plate/Flat/Block | Thickness 6mm-500mm | |
| Width 20mm-1000mm | ||
| Heat treatment | Normalized ; Annealed ; Quenched ; Tempered | |
| Surface condition | Black; Peeled; Polished; Machined; Grinded; Turned; Milled | |
| Delivery condition | Forged; Hot rolled; Cold drawn | |
| Test | Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc. | |
| Payment terms | T/T;L/C;/Money gram/ Paypal | |
| Trade terms | FOB; CIF; C&F; etc.. | |
| Delivery time | 30-45 days | |
7. DIN S355JR Steel Application
S355JR is used for medium strength structural parts of aircraft, propeller blades, transportation vehicles and building structural parts, and medium strength bolts and rivets of aircraft. It is also applied to aircraft skin, frame, rib, spar, rivet, etc.
8: DIN S355JR Steel Tolerance
Diameter(mm) | Tolerance | ||
Forged Steel Round Bar | 80-600 | Black Surface:0~+5 | Rough Machined or Turned:0~+3 |
650-1200 | Black Surface:0~+15 | Rough Machined or Turned:0~+3 | |
Hot Rolled Steel Round Bar | 16-310 | Black Surface:0~+1 | Peeled:H11 |
Cold Drawn Steel Round Bar | 6-100 | Black Surface:H11 | Peeled:H11 |
9: Delivery Condition
For hot forged bar, usually the delivery condition is hot forged, annealed/solid solution, rough turned/Black surface.
For hot rolled bar, usually the delivery condition is hot rolled, annealed/solid solution, Black surface.
For hot rolled plate, usually the delivery condition is hot rolled, annealed/solid solution, black surface.
For cold drawn bar, usually the delivery condition is cold drawn, annealed/QT, peeled/black surface
