| Quantity: | |
|---|---|
EN26
Qilu
Product Description
BS EN26 40NiMoCr10-5 1.6745 Steel Pipe
1: EN26 Steel Introduction
EN26 is a 2.5% nickel - chromium - molybdenum high hardenability, high tensile steel, generally supplied hardened and tempered in the tensile range 1000 - 1150 Mpa (Condition V) Rc 31 - 38.Characterised by high strength and toughness in very large sections - similar to EN25 but with higher carbon content, particularly suitable where high surface pressure exists. Pre hardened and tempered EN26 can be further surface hardened by flame or induction hardening, and by nitriding.
EN26 steel Stock in warehouse
2: EN26 Quality Standard
3: EN26 Steel Equivalent
| Country | Australia | Germany | Britain |
| Standard | X1444 | EN10250 | BS970 |
| Grade | X9940 | 40NiMoCr10-5/1.6745 | EN26/826M40 |
4: EN26 Steel Chemical Composition
| Grade | C | Si | Mn | P | S | Cr | Mo | Ni |
| EN26 | 0.36-0.44 | 0.1-0.4 | 0.45-0.7 | 0.04 | 0.04 | 0.5-0.8 | 0.45-0.66 | 2.3-2.8 |
| 1.6745 | 0.36-0.44 | 0.1-0.4 | 0.45-0.7 | 0.025 | 0.015 | 0.5-0.8 | 0.45-0.65 | 2.3-2.8 |
| X9940 | 0.36-0.44 | 0.1-0.4 | 0.45-0.7 | 0.025 | 0.015 | 0.5-0.8 | 0.45-0.65 | 2.3-2.8 |
5: EN26 Steel Mechanical Properties
The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normalized, tempered, QT. If you want to know the properties, kindly contact the salesman.
6: EN26 Steel Overviews
| Size | Round | Dia 6-1200mm |
| Plate/Flat/Block | Thickness 6mm-500mm | |
| Width 20mm-1000mm | ||
| Heat treatment | Normalized ; Annealed ; Quenched ; Tempered | |
| Surface condition | Black; Peeled; Polished; Machined; Grinded; Turned; Milled | |
| Delivery condition | Forged; Hot rolled; Cold drawn | |
| Test | Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc. | |
| Payment terms | T/T;L/C;/Money gram/ Paypal | |
| Trade terms | FOB; CIF; C&F; etc.. | |
| Delivery time | 30-45 days | |
7: EN26 Steel Application
EN26 alloy steels are used for Axles, Connecting Rods, Die Holders, Hydraulic Shafts, Spindles, Motor Shafts, Pins, Rams, Rolls, Sockets, Tool Holders, Torsion Bars etc..
8: Delivery Condition
For hot forged bar, usually the delivery condition is hot forged, annealed rough turned/Black surface.
For hot rolled bar, usually the delivery condition is hot rolled, annealed, Black surface.
For hot forged plate, usually the delivery condition is hot forged, annealed, milled surface
For hot rolled plate, usually the delivery condition is hot rolled, annealed, black surface.
