Material DIN 1.6582 Alloy Forged Steel Round Bar

Material DIN 1.6582 Alloy Forged Steel Round Bar

1: DIN 1.6582 Steel Introduction

1.6582 Alloy structural steels have high yield strength, tensile strength, endurance strength, yield ratio (generally about 0.85) adequate plasticity and toughness. This type of steel has a fairly high concentration of alloying elements, mainly corrosion-resistant steels, heat-resistant steels, wear-resistant steels and other special steels with physical and chemical properties. The mechanical properties of alloyed structural steels are superior to those of carbon structural steels, especially the heat treatment properties. The alloys are usually produced by EAF /VD /LF and, for special applications, by electroslag refining (ESR).

1.6582 Steel Stock in Warehouse

2: DIN 1.6582 Quality Standard

DIN 1.6582 steel according to EN 10083-3.

3: DIN 1.6582 Steel Equivalent

4: DIN 1.6582 Steel Chemical Composition

5: DIN 1.6582 Steel Mechanical Properties

The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normalized, tempered, QT. If you want to know the properties, kindly contact the salesman.

6: DIN 1.6582 Steel Overviews

7: DIN 1.6582 Steel Application

Heavy Machinery Manufacturing: In the field of machinery manufacturing, 1.6582 steel is commonly used to manufacture parts such as cycloidal pinwheels, bearings, gears, and drive shafts. These parts need to have high strength and toughness to withstand large transmission forces and shock loads.

Shipbuilding: In the field of shipbuilding, 1.6582 steel is used to manufacture propeller shafts, propeller shafts and other parts of ships. These parts require high strength and toughness to withstand the corrosive and intense loads of the marine environment.

Automotive industry: In the automotive industry, 1.6582 steel is used to manufacture crankshafts, connecting rods and other parts of automobile engines. These parts require high strength and toughness to withstand high speed rotating loads and high temperature environments.

Aircraft manufacturing: In the field of aircraft manufacturing, 1.6582 steel is used to manufacture aircraft wheels, engine shafts, aircraft propellers, rudder surfaces, landing gear parts and so on. These parts need to have high strength and toughness to withstand the impact of high-speed flight and inclusions.

8: DIN 1.6582 Steel Heat Treatment

Annealing

Temperature range 650-700°C.

Standardization

Temperatures in the range of 850 to 880°C.

Hardening

Temperatures in the range of 830 to 860°C. Oil is usually used as the cooling medium.

Tempering

Temperatures in the range of 540 to 680°C.

In addition, 1.6582 material should be preheated at a temperature between 900 and 1100°C before forging, and forged at a temperature of not less than 900°C, with a forging ratio of not less than 4:1.

9: DIN 1.6582 Steel Tolerance

10: Delivery Condition

For hot forged or hot rolled bar, usually the delivery condition is hot forged or rolled, annealed or QT, black surface or rough turned.
For hot forged plate, usually the delivery condition is hot forged, annealed or QT, milled surface.
For hot rolled plate, usually the delivery condition is hot rolled, annealed or QT, black surface.