| Quantity: | |
|---|---|
817M40
Qilu
Product Description
817M40 Alloy Steel Pipe
1: 817M40 Steel Introduction
Alloy steel 817M40 is an alloy steel with high strength and good toughness for applications requiring high strength and durability. It has high strength, good toughness, good hardenability and resistance to overheating stability, but also has high white point sensitivity and temper brittleness, which means that under certain conditions it may be brittle or damage. Therefore, attention needs to be paid to proper treatment and service temperatures to avoid these problems. In addition, the poor weldability of 817M40 steel requires high-temperature preheating and post-weld stress relief treatment to improve the reliability and durability of welded joints.
817M40 Steel Stock in Warehouse
2: 817M40 Quality Standard
BS970 1955-ENG WROUGHTSTEELSINTHEFORMOFBARS,BILLETSANDFORGINGSUPTO6IN.RULINGSECTIONFORAU.pdf
3: 817M40 Steel Equivalent
Country | Japan | Germany | Britain | USA |
Standard | JIS G4103 | EN10250 | BS970 | ASTM A29 |
Grade | SNCM439 | 36CrNiMo4/1.6511 | EN24/817M40 | 4340 |
4: 817M40 Steel Chemical Composition
Grade | C | Si | Mn | P | S | Cr | Mo | Ni |
4340 | 0.38-0.43 | 0.15-0.35 | 0.6-0.8 | 0.035 | 0.04 | 0.7-09 | 0.2-0.3 | 1.65-2.0 |
36CrNiMo4 | 0.32-0.4 | 0.4 | 0.5-0.8 | 0.035 | 0.035 | 0.9-1.2 | 0.15-0.3 | / |
817M40 | 0.36-0.44 | 0.1-0.4 | 0.45-0.7 | 0.035 | 0.04 | 1.0-1.4 | 0.2-0.35 | 1.3-1.7 |
SNCM439 | 0.36-0.43 | 0.15-0.35 | 0.6-0.9 | 0.03 | 0.03 | 0.6-1.0 | 0.15-0.3 | 1.6-2.0 |
5: 817M40 Steel Mechanical Properties
The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normalized, tempered, QT. If you want to know the properties, kindly contact the salesman.
6: 817M40 Steel Overviews
Size | Round | Dia 6-1200mm |
Plate/Flat/Block | Thickness | |
Width | ||
Heat treatment | Normalized ; Annealed ; Quenched ; Tempered | |
Surface condition | Black; Peeled; Polished; Machined; Grinded; Turned; Milled | |
Delivery condition | Forged; Hot rolled; Cold drawn | |
Test | Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc. | |
Payment terms | T/T;L/C;/Money gram/ Paypal | |
Trade terms | FOB; CIF; C&F; etc.. | |
Delivery time | 30-45 days | |
7: 817M40 Steel Application
High-load transmissions such as gears, shafts and bearings.
Machine parts and tools requiring high strength and toughness, such as drive shafts, chucks, etc.
Wear-resistant materials for special applications, such as cutting tools, hammer heads, etc.
8: 817M40 Steel Tolerance
Diameter(mm) | Tolerance | ||
Forged Steel Round Bar | 80-600 | Black Surface:0~+5 | Rough Machined or Turned:0~+3 |
650-1200 | Black Surface:0~+15 | Rough Machined or Turned:0~+3 | |
Hot Rolled Steel Round Bar | 16-310 | Black Surface:0~+1 | Peeled:H11 |
Cold Drawn Steel Round Bar | 6-100 | Black Surface:H11 | Peeled:H11 |
9: Delivery Condition
For hot forged rolled bar, usually the delivery condition is hot forged or rolled, annealed/QT, rough turned/Black surface.
For hot forged or hot rolled bar, usually the delivery condition is hot rolled, annealed/QT, Black surface.
For hot forged plate, usually the delivery condition is hot forged, annealed/QT, milled surface/Black surface
For hot rolled plate, usually the delivery condition is hot rolled, annealed/QT, black surface.
